product description
Lithium-ion batteries from JMT, high-tech for your motorcycle.
Batteries of the latest generation recognizable by the red housing cover.
By replacing a standard lead-acid battery with a JMT lithium-ion battery, you can save up to 5 kg of weight without significant effort.
The following advantages speak in favor of JMT lithium-ion batteries:
about 1/3 of the weight of the comparable lead-acid battery
unbeatable cost / weight savings ratio
Battery housing made of nylon, therefore a deformation in heat is practically impossible
can be installed in any position as there is no acid
contains no heavy metals
balanced discharge / charge of all cells by balancers
Fast charging with high charging current possible (up to 90% in 6 min)
very low self-discharge (max 5% per month)
even at high temperatures still good performance up to 60 ° C
safe technology and long service life
Lead-acid batteries can only use 30% of their capacity due to their specific properties.
while nearly 100% of the capacity is available for lithium-ion batteries.
For this reason, the lithium versions of the JMT batteries require only 1/3 the capacity of a comparable lead-acid battery for the same starting power.
A uniform state of charge of all cells is also ensured by a built-in processor ("balancer").
The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries using adapters.
The connections are identical, so the battery can be replaced in a few minutes without any further adjustments.
Please note that only suitable chargers may be used for charging. We recommend JMP chargers.
For the maximum recommended charging currents, please refer to the technical data below
Under no circumstances should chargers be used which attempt to desulphurate deep-discharged batteries under 10 volts with a voltage of more than 14.9 volts before they begin the actual charge.
The maximum charging voltage of 14.9 volts must never be exceeded.
The manufacturer guarantees a sufficient starting capacity up to -5 degrees Celsius.
Batteries of the latest generation recognizable by the red housing cover.
By replacing a standard lead-acid battery with a JMT lithium-ion battery, you can save up to 5 kg of weight without significant effort.
The following advantages speak in favor of JMT lithium-ion batteries:
about 1/3 of the weight of the comparable lead-acid battery
unbeatable cost / weight savings ratio
Battery housing made of nylon, therefore a deformation in heat is practically impossible
can be installed in any position as there is no acid
contains no heavy metals
balanced discharge / charge of all cells by balancers
Fast charging with high charging current possible (up to 90% in 6 min)
very low self-discharge (max 5% per month)
even at high temperatures still good performance up to 60 ° C
safe technology and long service life
Lead-acid batteries can only use 30% of their capacity due to their specific properties.
while nearly 100% of the capacity is available for lithium-ion batteries.
For this reason, the lithium versions of the JMT batteries require only 1/3 the capacity of a comparable lead-acid battery for the same starting power.
A uniform state of charge of all cells is also ensured by a built-in processor ("balancer").
The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries using adapters.
The connections are identical, so the battery can be replaced in a few minutes without any further adjustments.
Please note that only suitable chargers may be used for charging. We recommend JMP chargers.
For the maximum recommended charging currents, please refer to the technical data below
Under no circumstances should chargers be used which attempt to desulphurate deep-discharged batteries under 10 volts with a voltage of more than 14.9 volts before they begin the actual charge.
The maximum charging voltage of 14.9 volts must never be exceeded.
The manufacturer guarantees a sufficient starting capacity up to -5 degrees Celsius.
Customers also purchased
Review(s)